Our drilling machines have over 10 patents. Their drilling-speed is the fastest in Taiwan. No other brand can overtake on the most convenience and the shortest preparing time. The drilling speed is over 20% from other brand.。This machine special design to drill holes with high efficiency for bridge major plate, connecting plate, or rib plate … etc. Not only for smoothly working low, but also the precision on drilling is better than gantry type machine.
Combine two unit together to drill holes in the same time on two end of panel. Each unit have 40 holes per hour ( thickness : 40 m/m). two unit will have 640 holes per 8 hours (one day). If the holes quantity are increase more, you can increase one spindle to each unit to two unit of two-spindle model. The working quantity will be double. 1280 holes / day ( 8 hours) Please refer to our TACO, rail-type series.
Laser-Center Holes checking：
Patented design for dross center of drill, graph-recognition, teaching and inputting → Time-saving, preciousness & concenience.
Searching Margin operation：
Home point (first point)+any point on X or Y direction.
Auto feeding：
Z-axis pushed by independent hydraulic + measure tool length by encoder. Auto controlled on quick feeding position, reduce speed position, tool return timing and position. Achieves the boundary of automatic management.
Home point (first point)+any point on X or Y direction.
Spindle：
Special-purpose of BT-40 spindle developed by ourselves， use high-life, stop-push rolling-ball bearing. And direct-type of BT-40 can make sure to keep back the strength when cutting.
Spindle Stroke：
400m/m , suitable for any length of drill bits.
Shank：
To use BT-40 quick-change shank, High precious and low cost.
Marking：
It can quick marking, and also can quick hole-checking by Laser cross.
• Auto-balance position for hoist：
Machine can be collected by hanging to save space. Before hanging, you just push hanging button, the spindle will move to balance point position automatically. And this balance point position may pass through the parameter revision.
Home point (first point)+any point on X or Y direction.
Hole-pattern Input：
Patents CNC graphics software attached to coordinates rotation and traverse compensation. Programming
- graphic dialogue inputting
- coordinates inputting
- teaching inputting
- file transferred by DXF
Other function：
owing to long stroke on Z-axis, except processing the major bridge plate, rib plate, connecting plate, It can processing H-Beam, angle steel , bonding plate, a multi-purpose drilling machine.
 |
 |
 |
| Before load the work-pieces, please retreat the
machine at the end of Long-way Rail first. |
When the work-pieces is placed the correct position,
the machine enters on the top of work-piece. |
Please use the heavy-duty Hydraulic Clamp to fix
in the long-way RAIL for this machine, |
 |
 |
|
| Use TFI patented tool center laser sight for fast search margin operations |
And then it will fully automatic drilling. |
|
|
Operation Protection Buttons
Spindle not move to working area when loading/unloading workpieces
High Speed Drilling
High-rigid machine & efficient coolant system 0.35 mm/rev & 2.0 mm/sec when drilling Ø 28
Multi-Location Process
10 kinds of same/different jobs or 20 processing locations for smaller workpieces
Auto-process 20 piles of workpieces after working-hours
Auto Power-off
Programmed auto power-off after last process cycle
Auto Lubricating System
Auto lubrication feeding → Longer life
 |
Servo-Driven Tool-Feeding
Servo-driven tool-feeding → Stable in high-speed
Decelerate to give longer tool life when tools on surface of workpiece
Higher speed in workpieces |
 |
High Performance of Software Function
Easy to learn, high performance software both on small quantity in multi-job or massive production |
 |
Graphic-Pattern-Dialogue Input
100% of drilling patterns in the program Only 30 min. to learn to calculate, preciously up to 0.001
Patents CNC graphics software attached to coordinates rotation and traverse compensation.
Programming :
- graphic dialogue inputting
- coordinates inputting
- teaching inputting
- file transferred by DXF
|
 |
TK-33
Specialized Step-Feeding (Optiion)
High rigid frame body
Drill-grinder → Continuous step-feeding
Drilling as fast as advanced Japanese machines |
|
Processing Multi-Hole Connecting-Plates for Bridges
Suitable for a dozen of multi-hole groups
High Rigid Structure Designing
High rigidness and reinforcement in main frame and strength in accessories Longer life with no vibration in high speed drilling or bigger holes drilling
Fast-Marking
Fast-marking to locate holes
Position Check or Supports Adjustment
Laser cross to recognize markings
Position Check or Supports Adjustment
Marking checking before loading workpiece in order to adjust supporting positions avoids drilling to damage the error-placed supports
Holes Checking
Patented design for cross center of drill, to check the holes position.
High Torques & Revolutions Motor
TECO Motors → High torques for bigger diameters.
High revolutions for smaller diameters
Suitable for a dozen of multi-hole groups
Cranes of Lightweight & High Performance (Option)
German ABUS HB Crane to lift all workpieces
Built-in Teflon wheels → Lowest resistance 0.001
 |
Easy Re-Start
Press button Previous/Next Hole to continue process
Fast restart on unfinished hole when stopping during auto operation |
 |
High Quality Controlling System
CPU controllers, panel system, servo system, 1/0 panel, frequency converter, magnet contactors, and buttons/keys in controlling system are leading Japanese parts |
 |
Laser-Center Holes Checking
Patented design for cross center of drill, graph-recognition, teaching and inputting → Time-saving, preciousness & convenience |
|
