DNA-1631H
- Worktable 1600 mm x 3100 mm suitable for most bridge connecting plates
- Two spindles controlled by servos → Flexible & low limitation to process
- 20 locations to process & 20 workpieces after work-hours
| Models | DNA-1855A | ||
| Capacity | Hole Diameter mm | Ø 14 - 50 | |
| Tap | M6 -- M32 | ||
| Long Hole | 14 mm x  -- 32 mm x (unlimited) |
||
| Max. Works Size | 1800 x 5500 mm | ||
| Work Area | 4 -- 20 | ||
| Thickness | Total Thickness 100 mm (Vice Stroke 105 mm) | ||
| Hydraulic | 50 kg/cm2 (Max. 70 kg/cm2) | ||
| Coolant | Water bass coolant, Electric Pump | ||
| Chip Conveyor | Electric Conveyor | ||
| Spindle Motor | 5.5 KW x 2 | ||
| Spindle | Drill | 2 | |
| Shank | BT-40 | ||
| Speed control | Inverter Control | ||
| RPM | 48 - 720 rpm | ||
| Drill Length | 50 -- 470 | ||
| Positioning | X Stroke | 1800 mm | |
| X Speed | 12 m/min | ||
| X Drive | Servo Motor + Rolling-ball Bolt | ||
| Y Stroke | 5500 mm | ||
| Y Speed | 12 m/min | ||
| Y Drive | Servo Motor + Rolling-ball Bolt | ||
| Z Stroke | 400 mm | ||
| Z Speed | 3 m/min | ||
| Z Drive | Servo Motor + Rolling-ball Bolt | ||
| Clamps | Method | Hydraulic clamped | |
| Quantity | X | 10 | |
| Y | 20 | ||
| Force | 600 kg·f | ||
| Dimension | Work stand Height | App. 800 mm | |
| L x W x H mm | |||
| Weight | 12000 kg | ||
| NC Devices | Screen | Human-Machine Interaction (touch-controlled) attached with a screen to a industrial computer | |
| Servo Axis | 5 | ||
| Memory Capacity | 100 sets + CF card, unlimited when attached with a screen to a industrial computer | ||
| Min. Setting Unit | 0.01 mm | ||
| Prgramming | Multi-pattern process-dialogue inputting/ cross laser teaching/ files transferred by DXF when equipped with an industrial computer | ||
| Ax. Program | 1 home point mixed with 10 programs | ||
| Re-positioning | Machine continues auto operation from any position | ||
| Cutting Conditiion | Cutting condition (life, loading ratio, revolutions, feeding capacity, feeding time, penetration capacity) may input by hand | ||
| Fine Adjustment | Revolutions & feeding capacity may fine adjust ±50% | ||
| Signal Lamp | 3 colors (red, yellow, green) signal lamps | ||
| Tapping | ---- | ||
| Long Hole Milling | 14 mm x -- 32 mm x |
||
| Marking | |||
| Home Points | 4 home points, expanded to 8 home points (optional) | ||
The specification list is for reference. It may be modified y customer's requirement. |
|||
