DNC-1015T
- 1.0 meter x 1.5 meter, the most popular worktable
- Function for drilling, tapping and milling long-hole
- Hingh rigidness frame, competitive drilling speed
- High efficiency motors → High torques for bigger diameters and high rev. for smaller diameters, Ø 14 -- Ø 50 mm
| Models | DNC-128T | DNC-1015T | ||
| Capacity | Hole Diameter m/m | Ø 14 - 50 | Ø 14 - 50 | |
| Tap | M6 - M32 | M6 - M32 | ||
| Long Hole | 14x - 32x mm |
14x - 32x mm(unlimited) |
||
| Max. Works Size | 1200x800 mm | 1000x1500 mm | ||
| Work Area | 4 | 4 | ||
| Thickness | Total Thickness 100 mm (Vice Stroke 105 mm) | |||
| Hydraulic | 50 kg/cm2 (Max. 70 kg/cm2) | |||
| Coolant | Water bass collant, Electric Pump | |||
| Chip Conveyor | Electric Conveyor | |||
| Spindle Motor | 5.5 KW | 5.5 KW | ||
| Spindle | Drill | 1 | 1 | |
| Shank | Ø 48 Adapter | Ø 48 Adapter or HSK-63A | ||
| Speed control | Inverter Control | |||
| RPM | 150 -- 560 | 150 -- 560 | ||
| Drill Length | 100 -- 470 | |||
| Positioning | X Stroke | 1200 mm | 1000 mm | |
| X Speed | 12 m/min | |||
| X Drive | Servo Motor + Rolling-Ball Bolt | |||
| Y Stroke | 800 mm | 1500 mm | ||
| Y Speed | 10 m/min | 10 m/min | ||
| Y Drive | Servo Motor + Ball Screw | |||
| Z Stroke | 400 mm | 400 mm | ||
| Z Speed | 3 m/min | 5 m/min | ||
| Z Drive | Servo Motor + Ball bolt | |||
| Clamps | Method | Hydraulic clamped | ||
| Quantity | X | 8 | ||
| Y | 20 | |||
| Force | 600 kg·f | 600 kg·f | ||
| Dimension | Work stand Height | App. 800 mm | ||
| L x W x H mm | ||||
| Weight | 2500 kg | 5000 kg | ||
| NC Devices | Screen | Human-Machine Interaction (touch-controlled) attached with a screen to a industrial computer | ||
| Servo Axis | 3 | 3 | ||
| Memory Capacity | 100 sets _ CF card, unlimited when attached with a industrial computer | |||
| Min. Setting Unit | 0.01 mm | |||
| Prgramming | Multi-pattern process-dialogue inputting/ cross laser teaching/ files transferred by DXF when equipped with an industrial cpmputer | |||
| Ax. Program | 1 home point mixed with 10 programs | |||
| Re-positioning | Machine continues auto operation from any position | |||
| Cutting Condition | Cutting condition (life, loading ratio, revolutions, feeding capacity, feeding time, penetration capacity) may input by hand | |||
| Fine Adjustment | Revolutions & feeding capacity may fine adjust ±50% | |||
| Signal Lamp | 3 colors (red, yellow, green) signal lamps | |||
| Tapping | Tapping M6 - M32 | |||
| Long Hole Milling | 14 mm x -- 32 mm x |
|||
| Marking | To mark center and verify the program | |||
| Home Points | 4 home points, expanded to 8 home points (optional) | |||
The specification list is for reference. It may be modified by customer's requirement. |
||||
